Long Story Short: Fix A Hole In An Air Mattress With Gorilla Glue: First, Find a leak in your air mattress by using soapy water method or your hands and ear then once you located the leak then mark the leak and deflate your air mattress, and use gorilla glue to patch the holes or leaks and let it dry.
If you are on the camp or on a family vacation and don’t have a proper patch kit to repair the hole in your air mattress,
Then don’t worry because you can fix a hole in an air mattress with gorilla glue.
So that means you don’t need a patch kit to repair the holes in your air mattress.
There are lots of glues like super glue, glue gun, or other glues to patch holes in your air mattress.
But the special thing about gorilla glue is that they are water resistant, and handles lots of air pressure because gorilla glue has an element of urethane glue that gets tough when hard.
So fixing a hole in an air mattress with gorilla glue is the quickest way to patch holes in your air mattress.
So let’s get started.
Can gorilla glue fix the air mattress?
Yes, gorilla glue can easily fix a hole in an air mattress because gorilla glue is stronger than super glue or any other glue on the market.
And if you don’t have a patch kit then you can easily patch holes in an air mattress with gorilla glue.
Read More: How to Fix a hole in an air mattress with nail polish
How to Fix a hole in an air mattress with Gorilla Glue
Before you start fixing the hole in your air mattress, you need to locate all the holes in your air mattress because if you miss any tiny hole, then get ready to sleep on the ground in the middle of the night.
So finding and locating all holes and leaks in your air mattress is as important as fixing a hole in the air mattress.
First, before you start doing anything.
Always check the valve of your air mattress because most of the air mattress starts leaking from its valve side area.
So make sure there is no air coming and if there is a leak then you need to mark it.
Also Read: How to fix a hole in an air mattress with super glue
Step 1: Find A hole In Your Air Mattress
There are two ways to find a hole in your air mattress.
And these two methods are proven and tested ways to find leaks in your air mattress.
Way 1: Use Soapy water Method
This method is best if you can access soap and a spray bottle.
Mix soap into the water and mix them well in a circular motion, and pour the solution into a spray bottle.
And after creating a soapy water solution, now is time for you to start spraying the solution on the surface of your air mattress,
And if you can notice any bubbles around the surface of your air mattress then there is a leak.
Then you can slowly start spraying the overall air mattress to see if any bubbles are coming or not.
So this is how you can find tiny and big holes in your air mattress.
Way 2: Use Your Ears & Hand
Sometimes, you can’t access soap and water.
In this situation, you need to use your ears and hands to find out leaks in your air mattress.
But for this method, you need to give your 100% focus and attention.
Inflate your air mattress fully, and keep your ears near your air mattress.
And if you notice any “HISSS” sound coming from your air mattress then there is a big hole.
And if you don’t notice any sounds then there can be tiny leaks.
For locating tiny leaks you can wet your hand with water and slowly move your hand from the surface of your air mattress to the overall air mattress.
Make sure you give 100% of your attention.
If you do these steps then you will 100% find holes and leaks in your air mattress.
After finding the holes in your air mattress, now it’s time to mark down the holes.
Also Read: Patch Air Mattress with Duct Tapes
Step 2: Mark the holes & Deflate Your Air Mattress.
You need to immediately mark the holes in your air mattress.
And do not deflate until you mark down all the leaks in your air mattress because if you deflate your air mattress before marking down the holes then you may lose the locations of the leaks.
So first mark the leaks then deflate your air mattress.
Step 3: Use Gorilla Glue
Once you found the leaks, after deflating your air mattress you need to do the main step.
For this step, You need to use a paper towel.
Cut the 2 small squares of paper towels about an inch wide and an inch long.
Now put the gorilla glue on the hole of your air mattress, and slather 1 small square of paper towel with gorilla glue and put it on the top of the leak of your air mattress.
Then again repeat this process for the next piece.
And if you have an air dryer or blow dryer, heat up the patch with light heat settings.
Take a cloth or something to wipe out excess glue from your air mattress.
And let it dry for at least 2 hours, then that’s it.
So this is how you can patch holes in your air mattress with gorilla glue.
Final Words
So fixing a hole in your air mattress without a patch kit is possible, all you need a gorilla glue.
Because you can literally fix a hole in an air mattress with gorilla glue.
So if you are on the camp or can’t access the proper patch kit then this is the best way to patch leaks in your air mattress.
Superglue can dry fastly as compared to gorilla glue.
But gorilla glue is a waterproof glue that can hold more air pressure than super glue.
And if you have any questions regarding fixing a hole in an air mattress with gorilla glue then you can ask them in the comment section.
